Lumena LCHARG800-W / GSK-PS1 Pro Solar Litecharga 800mm Solar Bollard Light
UK Registered Design: 6074583
The Litecharga Solar Bollard Light is a 160mm diam. bollard with anti glare, frosted white polycarbonate lens. It is designed to look similar to a standard, mains commercial bollard light. At dusk, the solar bollard light will illuminate at full brightness, and then follow a gradual dimming sequence until it reaches 30% brightness after 5 hours. From then on it will remain at 30% until dawn. Even in the dullest of weather, our solar lights will still illuminate, although they may not last the entire night cycle, which in many cases is not a necessity.
Epistar LED chips (2W) generate a high lumen output with up to 50,000 hours life. Surface mount via the internal mounting base or use J-Bolts to root mount into wet concrete.
IK IMPACT TESTED – see specifications below for more information.
Please note, if located very close to the coast, this may affect the finish of the bollard.
Please allow up to 2-3 working days for delivery.
Pro Solar – LED Solar Bollard Light – 800mm
KEY FEATURES.
- Monocrystalline Solar Panel (up to 25 year life)
- Replaceable LiFePO4 Lithium Battery (LFP long life)
- High Output Daylight or Warm White Epistar LEDs (220-240 lumens)
- Durable Die Cast Aluminium (IK10) & Frosted Polycarbonate Lens
The Litecharga Solar Bollard Light is a 160mm diam. bollard with anti glare, frosted white polycarbonate lens. It is designed to look similar to a standard, mains commercial bollard light. At dusk, the solar bollard light will illuminate at full brightness, and then follow a gradual dimming sequence until it reaches 30% brightness after 5 hours. From then on it will remain at 30% until dawn. As a result, battery charge is retained for longer than other alternatives sequences. Even in the dullest of weather, our solar lights will still illuminate, although they may not last the entire night cycle, which in many cases is not a necessity. The on/off switch is concealed by a waterproof plug which is also much less noticeable. Mount this solar bollard via the internal mounting flange, which in completely concealed within the streamlined bollard.
Epistar LED chips (2W) generate a high lumen output with up to 50,000 hours life. This solar powered bollard incorporates a substantial monocrystalline solar panel and replaceable LifePO4 lithium battery. As a result, optimum charge levels are maintained.
The Litecharga is an ideal solar path light or solar driveway light. It is both simple and safe to install, with endless mounting positions, in comparison to mains fittings. Not only is solar lighting environmentally friendly, converting natural energy into electrical current it is also completely free to run.
Dimming Sequence & Active Smart Power System
The Litecharga uses intelligent time controllers, calibrated to the UK climate, to prolong battery life without compromising on brightness levels. These time controllers operate a gradual dimming sequence to maintain a brighter light when it is needed most, in the early hours of darkness, and a less bright light when it is needed less, often in the early hours of the morning. In addition, the Litecharga’s Active Smart Power System (ASPS) further reduces light emission when the battery voltage is low, resulting in longer-lasting light functionality.
Require a Root Mount Solar Bollard?
Purchase a set of Root Mount J-Bolts here to mount this bollard into wet concrete for extra stability.
Please allow up to 2-3 working days for delivery.
| SKU | LUME-LCHARG800-W |
|---|---|
| Manufacturer Part Code | LCHARG800-W |
| Is on Sale | No |
| Range | Pro-Solar |
|---|---|
| Wattage | 2w |
| LEDs | Epistar LED Chips |
| Colour Temperature (kelvins) | Daylight White – 6000K, Warm White – 3000K |
| Lumen Output | 220-240 lm |
| Beam Angle | 120 Degrees |
| Illumination Time | Up to 23 Hours at Full Charge |
| LED Expected Life | Up to 50,000 hours |
| Wattage Equivalent | 10W CFL / 42W Incandescent |
| Sensor | Light Sensor |
| IP Rating | IP65 |
| IK Rating | Main Body (excluding lens) = IK10 |
| Battery Type | 3.2v 12AH LifePO4 Lithium Battery – REPLACEABLE |
| Solar Panel | 5v / 3.5W Monocrystalline Solar Panel – approx 25 year life |
| Charging Time | 8 hours (AM1.5 1000W / m² 25ºC) |
| Working Temperature | -25ºC ~ 55ºC |
| Weight | 5.9 KG |
| Materials | Die-cast Aluminium, Polycarbonate |
| Dimensions | Height = 800mm |
| Mounting Option | Surface Mount (As Standard), Root Mount J-Bolts Kit (+£7.50), Ground Spike Kit (+£35.00) |
| Guarantee | 5 Years |
| Certification | UKCA, CE, RoHS |
| UK Registered Design | 6074583 |
| Waste Disposal / Recycling | Batteries: BPRN0843, Electrical: WEE/KC3440XY |